Categories
Articles

PSENmlock mini – Safe guard locking

The PSENmlock features a mechanical guard locking function, typically using a solenoid-controlled locking mechanism. This prevents the guard from being opened until certain conditions are met, such as a machine coming to a complete stop or a process reaching a safe state.

The PSENmlock from PILZ is a safety gate system that combines safe position monitoring and process guarding, including safe guard locking, in one system. It ensures that a guard is closed securely before potentially hazardous machinery can be operated or processes can be started. This is crucial in industrial settings to prevent accidents and ensure worker safety. http://www.pilz.com

Categories
Articles

PNOZ m C0 – Modular Safety Relays

Some versions of the PNOZmulti 2 may support Pilz’s proprietary SafetyBUS p, a safety network protocol. SafetyBUS p enables the connection of multiple safety devices and facilitates communication between them, enhancing the overall safety of the system.

With the connectivity options mentioned earlier, users can remotely monitor the status of the safety system, receive alerts for any faults or alarms, and even perform troubleshooting procedures from a central location. http://pilz.com

Pilz may provide dedicated software for visualizing the safety-related data and diagnostics of the PNOZmulti 2 controller. This software allows users to monitor the safety system in real-time, view diagnostic information, configure parameters, and generate reports.

The PNOZmulti 2 may offer various connectivity options such as Ethernet, USB, or serial connections, allowing for communication with other devices such as PCs, HMI (Human-Machine Interface) panels, or PLCs (Programmable Logic Controllers). This connectivity enables remote monitoring, programming, and diagnostics.

The controller often comes equipped with diagnostic LEDs that provide visual indications of the controller’s status and any occurring faults. These LEDs typically display information such as power status, operational status, and fault codes.

Categories
Articles

Safety relays | MyPNOZ

Once everything is tested and working correctly, finalize the project. Generate any necessary documentation for installation and maintenance purposes. Implement the designed safety solution in your physical setup according to the documentation generated. Conduct thorough testing of the implemented safety solution to ensure it meets safety standards and regulations. Obtain any necessary certifications for compliance.

Determine the outputs needed for each safety zone. Outputs may include control signals for door locks, machine stop signals, or other safety-related actions. Ensure that each output is associated with the corresponding safety zone. Set up the logic for each safety zone independently. Determine the safety functions required for each zone, such as Emergency Stop, Guard Monitoring, or Two-Hand Control. Configure the logic to implement these safety functions based on the inputs and outputs assigned to each zone.

mplement interlocking logic between safety zones to prevent conflicting safety actions. For example, ensure that activating the Emergency Stop in one zone deactivates the outputs of other zones to prevent unintended machine movements. Test and simulate the logic for each safety zone to verify its behavior under different scenarios. Use the simulation feature in myPNOZ Creator to identify and address any potential safety risks or issues.

Categories
Articles

Safety Relays – PSENmlock

PSENmlock operates based on the principle of magnetic coding. It consists of a magnetically coded actuator and a sensor. The actuator is typically mounted on the movable part of the safety gate or door, while the sensor is mounted on the fixed part. When the gate or door is closed, the sensor detects the presence of the actuator’s magnetic field and verifies that it’s properly aligned and secure. If everything is in order, it sends a signal to the control system, allowing the machinery to operate safely. http://www.pilz.com

The PSENmlock safety sensor is a product manufactured by Pilz, a company specializing in automation technology. PSENmlock is designed for monitoring safety gates and doors, ensuring that they are securely closed before machinery or equipment can operate. It’s commonly used in industrial settings to prevent accidents by ensuring that access to hazardous areas is restricted until it’s safe to enter.

This type of safety sensor provides reliable and tamper-resistant protection, as the magnetic coding makes it difficult to bypass or defeat without authorized access. Additionally, PSENmlock sensors are often integrated into larger safety systems, allowing for seamless communication with other safety devices and control components.

Categories
Articles

PNOZsigma | PT. Felcro Indonesia

The PNOZsigma relays are compact safety relays in widths 22.5mm and 45mm. They are used for monitoring E-STOP, safety gates, light barriers, two-hand controls or ESPEs with safe PNP transistor outputs and contact EDM. The relays are jumper link programmable for either PNP or NPN signals. http://www.pilz.com

They must be connected to a remote RESET device such as a pushbutton station to initiate the reset enabling function. The remote reset can reset the contacts if the pushbutton is held closed for more than 0.5s and can reset both the contacts and the internal relays if the pushbutton is held closed for more than 3s.

The chapter “Technical Description” is the first of several chapters that provide technical details of the PNOZsigma relays. The chapter is an introduction to the PNOZsigma relay range and offers an overview of the product range and the functions that are common to all relays in the range, before giving the variable features of the individual relays in later chapters. Safety solution provider since 2011, We offer pilz safety relays pnozsigma http://www.pilz.com

Categories
Articles

The best pilz e-stop | PT.Felcro Indonesia

This guide is not specifically targeted to persons only using Pilz controllers, in fact, most of the information can be used as a generic guide to automation with PLCs. Any information on this PLC is applicable to the Sercos or Ethernet bus for all control systems using fieldbus operation. This guide will give you insight and experience on control system development and programming with equipment and scenarios typical of today’s industry. Violet’s website is not limited to just PLC programming, Electronics troubleshooting and wiring with virtual equipment is explained in great detail to get the best understanding possible of control system operation. Violet will also give you practice on some control systems and program scenarios with the virtual equipment to further increase understanding. All practice sessions are focused around the PSS 4000 and Sercos bus but in every scenario, it is possible to relate the information to other PLC controllers. Due to online changes on Sercos operation and setup, not all scenarios will have the exact step by step practice. This guide may be of use in control system courses at colleges or industry for further PLC understanding and programming practice. No matter whom you are, a control system engineer, electrical technician, or a student, this guide will give you valuable information and experience on PLCs. The best pilz automation

Any changes made in PLC programming can be tested offline, providing a means of simulation to see the effects at the IT level or anywhere in between without any physical changes to the plant floor devices. The programming changes can also be stored and forwarded to an offsite location for disaster recovery solutions. Note that with the ever-changing technology, Pilz network products support various protocols and have multi-protocol capabilities. This ensures that network integration can be achieved regardless of what generation the control device may be. The best pilz automation

Categories
Articles

The best pilz in indonesia

Safety relays monitor the faults in the interlock devices. The basic logic used is based on the conditions of the input and output wiring. Input wiring is the voltage that the safety relay will accept to energize the relay to switch the output contact. The output contact will turn the machine off using the interlock devices. Internal logic is represented in the truth table, which shows the relationship between the input and the output wiring. From the truth table, the next step is developing the functions and faults equations. These equations are very important to find the minimal sum of products, which later develop the ladder logic. The final considerations are to implement the functions equation into the ladder logic. The safety relay also must be user friendly to someone troubleshooting the system. A fault in the system can be determined through testing the machine and forcing the input wiring to simulate a fault condition. LED indicators are useful to show the system is functioning, off, and a fault in the system. The last consideration is the modification of the function block. If a function’s equation is changed, the ladder logic can also be changed using software and just download it to the safety relay. http://www.felcro.co.id

Safety relays are the logical development of electromechanical relays, during those applications where safety, availability, and their costs are the major concern. These relays have enabling contacts and mirror contacts in one or more linked pairs which change over when the relay is actuated. Safety relays are used for monitoring the dangerous outputs and provide superior failure mode analysis such as a light curtain to assure that it does not decrease harm. http://www.felcro.co.id

Categories
Articles

Automation App Award 2023

Our innovative Key-in-pocket maintenance safeguarding system, which guarantees protection against unintended machine restarts, won third place in the Automations Best Award 2023, in the “Best Solutions” category. Readers of the media concepts “messtec drives” and “inspect” voted in our favour.Also, our new “Safety Distance Calculator” browser tool was awarded second place in the Automation App Award. The decisive factor that led to this development was as follows: “We want to support our customers with competence and the best possible environment” – Tobias Ulmer, Product Manager responsible for safety light curtains. http://www.pilz.com
The tool enables the safety distance for safety light curtains to be calculated simply as well as safely. Users save a significant amount of time and can immediately identify the right safety light curtain for their plant. http://www.pilz.com

Categories
Articles

Supreme Multitasking

As part of a retrofit, the production furnace manufacturer Aksoylar Robotik pursued its aim of converting its roller hearth furnaces to the state of the art in terms of operability, monitoring and safety. With the burner management system that was installed previously it was not possible to network the control units of the individual furnaces. What’s more, status, process and diagnostic data could not be displayed consistently, as desired, nor could error messages be assigned and rectified quickly. With the safe small controller PNOZmulti 2, which has been adapted to the special needs of heat treatment furnaces, customers of Aksoylar Robotik can now safely monitor and simultaneously control multiple burners, plus the whole furnace, in one system. http://www.pilz.com

The roller hearth furnaces from Aksoylar are equipped with multiple burners and are used for the specific heat treatment of metals such as steel and aluminium. They are flexible and intended for use in a variety of industrial applications. With safe monitoring of individual burners and simultaneous control of the entire furnace via the burner solution – in other words via a single safety system – for Aksoylar Robotik, it was the solution of choice. Using the software function block on the small controller, which electronically emulates the extended functionality of an automatic burner control, specific burner applications can be configured easily. For example, typical requirements include the control of safety, ignition and exhaust valves or the monitoring of combustion air pressure, flame, ignition and much more. The result: safe operation of burners, stable processes and, above all, high-quality production results in the roller hearth furnace. http://www.pilz.com

Categories
News

Machinery Safety in Tissue and Paper Making

Whether you are making paper or converting it to tissue for family care products you use machinery with many hazards. The threading of paper, the high rotation speed and the vast size of the machines create risks that are challenging to achieve machine safety. In your competitive global business you must achieve machine safety with a high level of availability and productivity. We help you succeed. http://www.pilz.com